- PROTA Wall Mounted Weatherproof Steel Enclosure
|Material:||Cold rolled sheet steel|
body and door : 1.2mm, mounting plate 1.5mm(the enclosure is less than 800mm high)
body and door: 1.5mm, mounting plate 2.0mm(the enclosure is over 800mm high)
|Surface:||Epoxy thermosetting powder coating, textured finish |
|Color:||RAL7032, RAL7035 or on customer's request |
|Protection level: ||IP66|
|Standard configuration: ||enclosure with gland hole, Door with foam PU sealing gasket and lock system, mounting plate, gland plate, gland sealing gasket and fixing accessories.|
1,There are strengthening strips with pilot holes is welded to both sides of the door by using the self-tapping M4 screws for the convenient installation (If the enclosure higher than 600mm)
2,The foam PU sealing gasket inside the door.
3,The door can be opened 130°by the plugging hinges
4,The slots design of the enclosure prevents dust and water entering into the enclosures plus the good coordination with foam sealing gasket, which supply a good protection of the enclosure.
5,There are 4 hanging holes in the back of the enclosure, which is very convenient for installation by the wall mounting brackets.
6,The door can be switched by both left and right side(door hinges on the left for the left open door, hinges on the right for the right open door).