Industrial Steel Electrical Power Distribution Box
Mounting plate, locking system, gland plate, sealing gasket and fixing accessories.
Cold-rolled sheet steel
Door: 1.2mm or 1.5mm
Body: 1.2mm or 1.5mm
Mounting plate: 1.5mm or 2.0mm
When the enclosure is less than 800mm high, body and door is 1.2mm THK, mounting plate is 1.5mm THK; if over 800mm high, body and door is 1.5mm THK, mounting plate is 2.0mm THK.
Surface Finish:Epoxy thermosetting powder coating, textured finish
Color:RAL 7032, RAL 7035 or as customer's request.
1,There are strengthening strips with pilot holes is welded to both sides of the door by using the self-tapping M4 screws for the convenient installation (If the enclosure higher than 600mm)
2,The foam PU sealing gasket inside the door.
3,The door can be opened 130°by the plugging hinges
4,The slots design of the enclosure prevents dust and water entering into the enclosures plus the good coordination with foam sealing gasket, which supply a good protection of the enclosure.
5,There are 4 hanging holes in the back of the enclosure, which is very convenient for installation by the wall mounting brackets.
6,The door can be switched by both left and right side.