PL Electrical Junction Box
Material:1.2mm cold rolled sheet steel
Surface: epoxy thermosetting powder coating,textured finish
Color:RAL7032 & RAL7035
PLX Electrical Junction Box
Material:the cover and the body are both made of SUS304L&SUS316L stainless steel
Surface: wire drawing finish
1.The lid and body are assembled by standard screws and washers, which ensures the protection grade and the utilization and maintenance in the narrow space.The slot of the body strengthens the enclosure itself, also prevents the dust and the water when enclosures are opened.
2.The PU foam sealing gasket makes sure the IP66 protection degree of the enclosure.The grounding wire can be connected to the body and lid.
3.The two sides inside body are equipped with supporting strips with screw holes, which ensures the maximum height of boxes.Moreover, they can be installed with DIN rails and mounting plate.
4.Specialized plastic insulated tubes prevent the screws peeling off from the lid, also guiding the direction when fastening the screws.
PS:Customized Stainless Steel JUNCTON BOX
Q: What's the thickness of the enclosures?
A: To our standard: door & body: 1.2mm THK, galvanized mounting plate: 1.5mm THK to the enclosures
Also we can customize the thickness under your request, max. 2.5mm THK, and the mounting plate can be painted into orange as well F.Y.I.
Q: What's the color of the enclosures?
A: To our standard: the color of powder-coating is RAL 7032 (pebble gray), RAL 7035 (light gray). Also we can paint them into RAL 9002, RAL 2000, X15 orange, or customized as per your request.
To the stainless steel type, the finish is hairline, usually don't need powder-coating, but we also do it for some special purpose on your request.
Q: Are those enclosures can be used outside door?
A: To our standard: the powder-coating is for indoor use, you have to tell us where you will use them, and the weather condition would be helpful, to let us choose the right powder material for outdoor use, and even with UV protection.
To stainless steel type, of course, they can be used out door.
Q: Can you supply the enclosures follow our design?
A: Yes, we can do that, after you give us the detailed drawings of your design, we can follow your instruction to customize the enclosures on your request.